Is the electronic throttle controller installed or not? Will it affect the original car after installation? What is the working principle of the electronic throttle controller?
Because the transmission process is time-consuming, the electronic throttle
will be sluggish when driving. In order to improve this situation, electronic throttle controller
came into being. Therefore, by adding electronic throttle controller to shorten the acceleration time and improve the acceleration, it is absolutely a high cost-effective means of power upgrading.
The electronic accelerator
does not need to dismantle any mechanical part of the vehicle, nor need to install any mechanical mechanism. It can only be regarded as a signal converter, which can amplify the signal of the accelerator pedal to the ECU, to achieve a faster acceleration effect, and the installation is quite convenient.
After installation, the external display shall be fixed, the relevant information shall be clear at a glance, all the decisions of the original vehicle system shall be clear, the four modes shall be switched at any time, and the use is quite convenient. In addition to the original mode, the other three modes are adjustable in 10 sections, and the car owner can completely adjust according to his driving habits.
Fuel saving mode, this mode can save fuel, but the throttle response speed is lower than that of the original factory. The sensitivity under this mode can be adjusted through the increase and decrease buttons until you think it is appropriate.
In motion mode, the throttle response speed in this mode is faster than that in the original factory. You can adjust the sensitivity in this mode through the increase and decrease buttons until you think it is appropriate.
In Super Sport mode, the throttle response speed in this mode is 50% faster than that in P1 mode, and the sensitivity in this mode can be adjusted through the increase and decrease buttons until you think it is appropriate