How to use the emergency starting power to charge the car when the battery is found dead? For many car owners, they will encounter the problem that the car doesn't ignite, for example, the more anxious they are to go out, the more unable they are to start, which makes people anxious. Especially in winter, when the weather is relatively cold, the phenomenon of no ignition will be frequently performed on many old models. However, even for new models, in this cold weather, there are many cars that cannot be ignited. At this time, you need to use the emergency starting power to start the car.
The steps are as follows:
1. Turn the switch from the off position to the on position. Let's switch this function key later, and change the output mode to ec512v to output 12V voltage. At this time, we will plug the head in again, and plug it to the end;
2. Next, insert the plug into the cigarette lighter. At this time, there will be a detection and a voltage display. There will be a blue light flashing here, and then the car battery will be charged. When the voltage of the car is more than 13V, we can try to start the car at this time. Generally, the voltage will start after charging for about 10 minutes, because the charging current is very large. After 10 minutes, the voltage will be more than 13V, so we can try to start the car. After starting, we can pull it out, and then turn off the power switch, pull the plug off, and turn off the power switch Put the products and accessories back in the kit, and that's it.
The above is the steps and procedures for the emergency starting power supply to charge the car. Do you think it's very simple. As long as your car is ready for the emergency starting power supply of TROS car, you don't need to worry about the car running out of power in the future. If you are interested, please follow the official website of TROS, www.potentbooster.net. For details, please contact customer service personnel.